Plan
We plan cable routes to each room and check your current LNB.
Kids want cartoons, you want the rugby. With Extra View, two decoders share one subscription so different rooms can watch different channels. We set up the LNB, cabling and decoder linking for you.
We plan cable routes to each room and check your current LNB.
Fit a suitable LNB if needed so each decoder gets its own feed.
Run neat cabling to every TV point.
Connect and set up decoders so Extra View works properly.
The technician checks the decoder models, available LNB outputs and practical cable routes before work starts. This prevents unnecessary visible cable and confirms whether the current dish equipment can support the planned rooms.
After cabling and linking, each decoder is checked for signal and communication while both televisions are operating. You can expect the setup to be tested as one system rather than treating each room in isolation.
The linked decoders are not communicating correctly. We inspect the heartbeat or network connection, decoder settings and cabling between viewing points before changing equipment.
One room is not receiving its expected satellite feed. When the other room works, the fault is often isolated to that cable, connector or LNB output. We test that path directly.
We route cables through ceilings and along skirting where possible so extra rooms don't come with messy wires.
If your second decoder keeps losing signal or showing errors, it's often a cabling or LNB issue — we can diagnose and fix it.
Available 24/7 in George, Knysna, Plettenberg Bay, Sedgefield, Wilderness, Mossel Bay, Great Brak River, Hartenbos and Oudtshoorn — and across the wider Garden Route.
Extra View lets you link two decoders on one account so you can watch different channels in different rooms.
Usually not — but you may need a different LNB and extra cabling. We'll check your setup.
Call us with your layout and we'll advise the best multi-room setup for your home.